Mini Stock Division 2011

This class will have two feature events every night a B feature and a A feature being determined by quality times. Given the slower cars and the rookies a chance to win and learn more. Time trails will be very important and watched very close for no sand bagging, the B feature will have a breakout rule and if you breakout you will be placed in the A feature that week.

1- Any stock production 4 cyl car

2- No turbo or superchargers

3- No all wheel drives

4- Unaltered firewalls, motors must be stock and mounted in stock location, in stock mounts. Also must retain stock transmission.

5- Must retain all stock struts and shocks but coilovers springs are allowed no adjustable coilovers.

6- Caster and camber adjustment allowed on suspension but must retain stock lower control arms, can cut on upper arms for adjustment purposes.

7-Only racing parts allowed are seat, wheels and fuel cell.  Fuel regulators are ok but must not go over stock pressure settings and it will be checked!!

8- Wheels must be steel only and max. width 7in can run racing wheels

9- Must run racing seat belts.

10- Tire must be street DOT tires max. width 60 series, no made for racing tires or recaps. Tires cannot have any less than 200 thread wear. If your uncertain contact KMS and we will let you know.

11- Any computers that have been tampered with will be taken and declared illegal for that event, and track also has the option to trade out computer boxes anytime. And all cars must hit a rev limiter, excluding cars that wasn't equipped with one.

12- Spoilers must not be any taller than 6in

13-K&N filter are ok

14- Headers ok

16- All cars must remain stock motors and trans for that car

17- Rear wheel drive cars can run Holley 350 carbs and can run wedge bolts in the front only

18- Motors must be completely stock. No porting or polishing of any kind. No stroking of engine in anyway

Car Specs.

1- Must gut all flammable materials inside car and outside, must remove all glass including windshields front windshield optional, no extra gutting can remove dash.

2- All door must be welded or chained shut.

3- Ok to gut hoods and trunks

4- 1/4 x 18 door plate must cover complete door.

5- All cars are recommended at least 4 point cage with 3 driver side door bars and 2 in passenger side, bars can run through front and back of seat belts. car. And must run racing seat belts.

6- You must run a door plate extending all away across the door must be at least 1/4in thick and 20in tall and bolted on or welded on